WLP Series

2.4GHz Lightning Protector
Lightning Surge Protector
Protect your wireless equipments from Lightning strike & surge
Bulkhead or non-bulkhead N-Type

Feature
The OvisLink WLP Lightning protectors provide safety for your wireless equipments from Lightning strikes and electrical induction.  If you setup your wireless antenna in open space or rooftop, the antenna can be susceptible to Lightning strike or proximal electrical induction.  The Lightning protector will re-direct the electrical current to the ground to safeguard your equipments.  

OvisLink provides various connector configuration for the Lightning protectors.  Bulkhead model comes with extra mounting plate for attachment to the mounting surface.

WLP-90MF:  For installation between antenna and cable, no bulkhead
WLP-90MFB:  For installation between antenna and cable, bulkhead
WLP-90FF:  For installation between cables, no bulkhead
WLP-90MF:  For installation between cables, bulkhead
Specification
  • Connector type
    • WLP-90MF:  N-type male to N-type female, non-bulkhead
    • WLP-90MFB:  N-type male to N-type female, bulkhead
    • WLP-90FF:   N-type female to N-type female, non-builkhead
    • WLN-90FFB: N-type female to N-type female, builkhead
  • Impedance
    • 50 ohm
  • Frequency Range: 3GHz
  • V.S.W.R.   1:1.5 Max (0~2.7GHz)
  • Insertion Loss:  0.3dB
  • Impulse Breakdown Voltage:  1000v 5KV/uS Max
  • Insulation Resistance: 10,000M Ohm
  • Max. Withstanding Current:  5000A 8/20us
  • Max. Power:  200W PEP
  • Breakdown Voltage:  DC 90V
  • Dimensions: 86mm x 45mm x 20mm Max.
Ordering Information
WLP-90MF       Lightning Protector: N-type male to female 
WLP-90MFB     Lightning Protector: N-type male to female, bulkhead
WLP-90FF        Lightning Protector: N-type female to female
WLP-90FFB      Lightning Protector: N-type female to female, bulkhead

Back to Menu